ADDRESS

Plot-2185/A, Block-I (Extension) Bashundhara C/A, Dhaka-1229

BUSSINESS HOUR

Sat - Thu: 9:00 AM - 5:30 PM Friday Closed

HOTLINE

09612 - 008813 01713 - 230055

Welcome to CTC

CATHARSIS TRAINING  CENTRE is dedicated to the task of value addition to the huge human resource potential of the country. CTC is always mindful of the client’s needs and has a flexible training methodology and system to tailor the training curriculum as per the requirements of the employers at home and abroad.​

Our Training Programs

Our main objective is to assist Bangladesh workers to pass the Exam. Our range of syllabus includes skill training (Electrical, Plumber, Rod binder,Mason, Scaffolder, Steel binder, Fabricator, Shuttering carpenter, Tiles  fitter, Painter, Welder, Computing) and language  course (Japanese, English) abroad.​

COURSE DURATION: 3 MONTHS (THEORY AND PRACTICAL)

REQUIREMENTS: A person who has studied up to class 5 or 8 and 18 years old (minimum) can join.

COURSE AIM: This curriculum guide is based on the tasks to be performed like Electrical hand and power tools, Measurement and calculation system, motor rewinding both 1 single phase & 3 phase, house wiring, motor control systems, earth wiring, electrical parts maintenance & Service. It also to perform Electronic Equipment Maintenance, Servicing, and Problem Solving Techniques work in Electrical Industries Sector as the standard expected in the Industry.

COURSE DURATION: 3 MONTHS (THEORY AND PRACTICAL)

REQUIREMENTS: A person who has studied up to class 5 or 8 and 18 years old (minimum) can join.

COURSE AIM: This curriculum guide is apply Occupational Health and Safety (OHS) practices in the workplace, work with construction tools and power tools, carry out construction measurement and calculation, carry out stone and brick works, pile structural bricks and block, accomplish masonry surface plastering. It also to perform wall paneling using bricks/stones, apply water proofing activities in construction Sector as the standard expected in the Industry.

COURSE DURATION: 3 MONTHS (THEORY AND PRACTICAL)

REQUIREMENTS: A person who has studied up to class 5 or 8 and 18 years old (minimum) can join.

COURSE AIM: This curriculum guide is based on the tasks to be performed straight, scaling rust from M.S. bar or rod, cutting M.S. bar /rod as per drawing, make hook, bend, lap, chair, separator, spacer & welding of rod as needed, make ties and stirrups (Square, rectangular, round or circular), fabrication of M.S bar in beams (floor and roof), fabrication of M.S bar in RCC one way slab, two way slab and flat slab/ flat plate slab.

COURSE DURATION: 3 MONTHS (THEORY AND PRACTICAL)

REQUIREMENTS: A person who has studied up to class 5 or 8 and 18 years old (minimum) can join.

COURSE AIM: This curriculum guide is based on the tasks to be performed lay and fix tiles & marbles both horizontally & vertically on wall and floor, learn selection and use of tools for measuring, marking, cutting, laying and fixing marbles & tiles, comprehend and apply grouts and sealants for flooring and cladding works which includes selection and use of different tools, equipment, grouts and sealants for sealing joints and finishing of flooring and cladding works. It also able to Work according to personal health, safety and environment protocol at construction site

COURSE DURATION: 3 MONTHS (THEORY AND PRACTICAL)

REQUIREMENTS: A person who has studied up to class 5 or 8 and 18 years old (minimum) can join.

COURSE AIM: Use terminology common to the sheet metal industry, fabricate sheet metal duct fittings using various seams and locks, use tools and equipment in a safe manner, develop and follow appropriate safety practices when working in a sheet metal shop or job site, fabricate light gauge duct fittings, assemble and hang a duct run installation.

COURSE DURATION: 3 MONTHS (THEORY AND PRACTICAL)

REQUIREMENTS: A person who has studied up to class 5 or 8 and 18 years old (minimum) can join.

COURSE AIM: Properties of timber, Introduction to saws and sawing technique, Measure, mark, and cut post to length, Introduction to glue, Intro to nails and hammers, Nail and glue rails of crate, Intro to drills and drivers, Glue and screw base of crate, Intro to jigsaw, Create handles for crate.

COURSE DURATION: 3 MONTHS (THEORY AND PRACTICAL)

REQUIREMENTS: A person who has studied up to class 8 or S.S.C and 18 years old (minimum) can join.

COURSE AIM: This curriculum guide is based on the tasks to be performed MS word (Typing), MS Excel (with if, or, and Logical function), MS Power Point, Basic maintenance of Computer and Software Installation etc.

COURSE DURATION: 3 MONTHS (THEORY AND PRACTICAL)

REQUIREMENTS: A person who has studied up to class S.S.C or H.S.C or Equivalent degree and 18 years old (minimum) can join.

COURSE AIM: Beginner Level- Prepare the students for taking the Japanese Test (F-G Level) and Japanese- Language Proficiency Exam (JLPT N5). In this course, you will learn the four language skills (listening, reading, writing and speaking) in a well-balanced comprehensive manner, and be able to systematically learn. This course is also for those who want to take the Japanese Language Proficiency Test (JLPT, J. Test and NAT Test). This course is also recommended for those who wish to continue Japanese language program, or vocational school, or work as well as those who wish to study Kanji. In addition, for those wanting to pass JLPT N3, it is possible to open a Higher Advanced class based on the number of students and the duration of study. So please do not hesitate to inquire about it Course Level for Prep CCHITSE for Further Education Course Level Reference Framework on Japanese Language Proficiency Level (Guideline Bused on the Japanese Language Proficiency Test, J. Test, NAT Test).

COURSE DURATION: 3 MONTHS (THEORY AND PRACTICAL)

REQUIREMENTS: A person who has studied up to class S.S.C or H.S.C or Equivalent degree and 18 years old (minimum) can join.

COURSE AIM: Beginner Level- Prepare the students for taking the Japanese Test (D-E Level) and Japanese- Language Proficiency Exam (JLPT N4). In this course, you will learn the four language skills (listening, reading, writing and speaking) in a well-balanced comprehensive manner, and be able to systematically learn. This course is also for those who want to take the Japanese Language Proficiency Test (JLPT, J. Test and NAT Test). This course is also recommended for those who wish to continue Japanese language program, or vocational school, or work as well as those who wish to study Kanji. In addition, for those wanting to pass JLPT N3, it is possible to open a Higher Advanced class based on the number of students and the duration of study. So please do not hesitate to inquire about it Course Level for Prep CCHITSE for Further Education Course Level Reference Framework on Japanese Language Proficiency Level (Guideline Bused on the Japanese Language Proficiency Test, J. Test, NAT Test)

Academic Systems

Catharsis Training  Center (CTC) conducts different types of training. Thus, the academic system is also different. All the training’s are technical in nature and mostly practical oriented. Approximately 80% classes is based on practical and 20 % classes are theoretical. Different academic systems are as under

January 09 at 09:00 AM

Ground Hall

April 09 at 09:00 AM

CTTC Hall

July 09 at 09:00 AM

CTTC Lab

October 09 at 09:00 AM

Ground Hall

08

Total Base

02

Running Base

50

Total Students

01

Years Experience

Our Objective

An ideal and complete education campus where quality education activities will be ensured. To awaken creativity, discipline, dignity of labor, moral, human, social, behavioral and religious values ​​in the thoughts, consciousness and actions of the students. To make every student suitable for the next level of higher education. By successfully implementing these goals and objectives, to present this institution as an exemplary model to the country and society.

ACADEMICS

Co-Curricular Activities

The institute has got all indoor and outdoor recreational facilities are available here for the students and staffs of this Institute. 

ACADEMICS

Accreditation Authority

We are approved by Bangladesh Technical Education Board (BTEB) and National Skills Development Authority (NSDA).

ACADEMICS

Notice Board

The Catharsis Training and Testing Center is conducting various courses approved by Bangladesh Technical Education Board (BTEB)